Skip to main content

The petite MZ...

I asked a question on the MZOG • MZ Owners Group if I should call my bike an MZ or a MuZ. I got some very informative replies. One reply was emailed to me with a link to Wikipedia MZ entry.

What really caught my eye on this webpage was this very petite MZ 125 4 stroke water cooled single.



This is what was said about this bike… “MZ currently manufactures a line of 125cc 4-stroke motorcycles using a new and powerful engine designed in-house. The current MZ 125 produces 15 crank-horsepower (11 kW) and almost 10 lbf·ft (14 N·m) of torque. It is a liquid-cooled pressure-lubricated dual-overhead-cam design with 4 valves, high-voltage electronic ignition and an 11000 rpm ignition cut-off. This is officially the most powerful 125cc 4-stroke engine mass-manufactured and has also proved highly reliable. This engine is used in 4 models of motorcycle, all of which share a common frame. The frame is a tube-steel backbone with the engine as a stressed bottom member. Changes in the suspension, facia, gearing, and equipment make the four models relatively distinct, despite the shared platform. All four bikes feature a 6-speed transmission and dual disc brakes.
The RT-125 is a mini naked sport bike with tasteful chrome accents and aggressive looks and handling.
The 125-SM is a Super-motard style bike with taller street tuned suspension, tallish gearing, and reduced weight.
The 125-SX features the same appearance as the SM but has a suspension tuned more for off-road use, enduro-style tires, and slightly lower gear ratios.
The 125 FunX is a minimalist light-duty moto-cross bike.
All four 125s are capable of speeds over 65 mph (105 km/h), with the fastest being the RT and SM, both of which are capable of 75 mph (120 km/h) sustained speeds. This makes the MZ 125s amongst the fastest sub-250cc bikes available.”

If you are reading this an own one of these please leave a comment and tell us about your MZ 125.

Here is a link to the Offical MZ site and the page for this bike...

Comments

  1. Hi!
    I was reading your blog after searching MZ Scorpion, and noticed this entry about the MZ125.

    Our company did a project with MZ back when these bikes were first being introduced to the US market.

    We did tons of testing and created some kits for them - however, MZ was sold before the project was completed. Here's some of what we found out about the little bikes.

    1. We're not sure what dyno they used to get that 15 crank hp number, but the real numbers at the rear wheel were way less than 10 hp.

    2. A standard Honda SL125 will outrun an MZ125 by at least 5 bike lengths in 1/2 mile.

    3. The engine is hugely overbuilt, leaving so much space that we were able to create a 220cc bore kit without sacrificing reliability.

    4. The bike weighs alot.

    5. There is no way in the world that a stock model could reach 65mph. With a lightweight rider, fully tucked, we achieved 59 mph. Though, on the dyno, the bike will show 65mph without wind resistance.

    6. The FunX (with it's streetbike chassis and uber-tall suspension) was the most ill-handling dirt bike I've ever ridden.

    7. The MZ 125cc water cooled engine had tons of potential - this could have easily been made into a very fast 250, with bullet-proof reliability, right from the factory.

    Pam F.
    www.powroll.com

    ReplyDelete
  2. Hi, i have an MZ RT 125 over in the UK. And i have to say, what an amazing bike. I have the 14.6bhp 2003 model which has been on several dyno tests now. And when i first got it, it did 70mph with ease. It now does in excess of 85mph which is nice for what is a still learner legal requirements over in the UK.

    It also runs and sounds lovely. And the handling is superb. Never had any problems except the sprag clutch which is a common MZ fault apparently. But now MZ make the replacement part at cost as its one of the only known fault woth the bike.

    An amazing bike all round, i would recomend it anyday of the week.

    ReplyDelete
  3. Hi there, I have the 04 RT 125 and love it to pieces, the latter part of that sentence becoming more true every day it seems.
    I dont know or claim to know much about bikes so if jon could give me some pointers to hitting higher speeds with my bike that would be great! The real question I want to ask is where I could find a manual for the bike or at least an engine layout and or diagram?
    Any help with this would be greatly appreciated if someone could e-mail me at alanmoll@aol.com and I will also check back here for answers...

    To be helpful as well, i've never had problems with the bike and it's great fun to zip around the city with reasonable power and great handling, the bike goes suprisingly far over considering it's weight and appearance. I would recommend this bike but have had problems around norwich sourcing parts.

    ReplyDelete
  4. Hello Fellow MZ 125 Owners,,

    I have a 2003 SM with less that 5k miles on it..
    Im currently looking for a big bore kit and found a few on German Ebay..
    Ive had over 70mph out of mine and no issues at all with her..
    Im in the uk and use www.grahamsmotorcycles.com for parts..
    Any questions email me on simon_field666@hotmail.com

    ReplyDelete
  5. Had one of these bikes. It rides and handles well. I was easily able to get 130Kmh. I've ridden many 125 models. this is deffinately one of the best. The only bike i enjoyed more due to its handling would be the Honda CBR.

    ReplyDelete
  6. Hi I have an 06 plate mz sx 125 very heavy bike wont lift up with out full revs and dumping clutch.. Ride is smooth power is plenty just needa more ooooomph to get it on back wheel easier... Over all a greay bike love the kawasaki green colour to... Im a uk rider aswell...

    ReplyDelete

Post a Comment

Popular posts from this blog

Tuning 40mm BING CV carburetors for BMW motorcycles by ear.

Steve Doyle has put together this great and simple guide to tuning your Bing carbs. No need for expensive tuning equipment. So over to Steve...... Any feed back on this How To please email me and I will pass it onto Steve. There are 3 common methods to syncing the carbs. They will all work 1. Shorting the plugs. http://bmwmotorcycletech.info/synchcarbs.htm and http://www.airheads.org/content/view/216/98/ 2. Using a manometer of some sort. Carbtune, Twinmax or home made http://www.airheads.org/content/view/183/98/ 3. Using your ears. No comprehensive articles that I could find.. In the spirit of learning to service and tune at home and after lots of reading, I decided that for me the "by ear" technique might be the most useful, as it doesn't require any special tools and can be performed anywhere. There is no risk of electrical damage to the bike or the one doing the adjusting. It was very difficult to find a comprehensive description of the procedure, so using the combi

On a Sure Footing....

I love my BMW. More than any other bike I have owned. This doesn’t mean that it is not without its blemishes. Take the hair trigger sidestand. Known to fold up when an Alpaca herder in the Andres sneezes and the bike is in Australia. Many a BMW owner has found their bike on its side on the ground. Fairing broken. The sidestand has folded up into the raised position. Why? Because it likes to. Once the smallest amount of weigh transfers off the side stand it will fly up. Also if you have an RT type fairing as mine does you can not put the stand down when sitting on the seat. Well I can’t with my short legs. I have to clamber off the bike while holding it up right and then use centre stand. I don’t trust the sidestand. This Video shows how vicious the original sidestand is. Click on the play button. That all changed yesterday. I fitted a SureFoot sidestand . Moto-Bins in the UK supply these. They are of a very sturdy construction. Comes with full fitting instructions and 2 new

Ride impression of the Yamaha MT-03.....

Yamaha have realeased their new 660 based single. The MT-03. See I so want one....MT-03 The bike can be had in Europe but not here in Aussie land. I have asked Yamaha Australia if they will bring them in. They said "No plans at this stage to introduce the MT03 in to Australia." To rub salt into the wounds, axxess , the forum admin guy at http://forum.monoconnection.nl/ got to ride one. NOOOO!!! So unfair. He translated his ride impression into English for those of us who will not get to ride this. Thank you mate for doing this for us. So lets see what he has to say..... Saturday 16 February I could try the Yamaha MT-03 at Gebben Motors. I could try a brand new red 2008 model. After a short instruction and a warning because of the new tires we were ready to go! The first thing I noticed was the enormous wide steer and the upright riding position It gave me a feeling of absolute control and power! The seat was quit hard but not uncomfortable at all. Unless it was still freez