Skip to main content

Welcome to my MZ Blog.



Welcome to my MZ Blog. Here you will read about my MZ Scorpion Traveller.


(23/06/2007) I picked up my MZ Scorpion Traveller that I bought from Better Bikes.

MZ are a very old German company that has made 2 stroke 250s for many years.
Thankfully my MZ is not an oil smoke blower. It has a lovely water cooled Yamaha 660cc five valve single cylinder engine. Rest of the bike is German made. I seem to be the 4th owner. The first owner bought the bike in Sept 2000 in South Australia. Then it seems to have passed onto 2 other owners till it was brought over here to Sydney.

The bike had 42,164 kms on the clock when I picked it up today. It has a full service record too. So I know that this bike has been looked after. It seems to have fallen over at least once. There is a graze mark on the right side of the fairing. The right mirror is scuffed up. The Muffler has a few scratches on it. But that did not put me off. The engine runs so nicely. Better Bikes did a great job in detailing the bike. I would highly recommend them to anyone that is looking to buy a good second hand bike. Leon if you read this you sold me one of the best bikes I have ever owned. :-)
Enough of me waffling. Here are some photos of the Traveller. I took today in Parramatta Park.



Labels:

Comments

  1. Anonymous2 July 2007 at 02:26

    Sharp looking bike, dude! Good to hear from you anytime -- what better way than a blog?

    -- your Bama buddy, Boar

    ReplyDelete
  2. Anonymous2 July 2007 at 17:46

    Hiya Ross. Nice bike, nice blog mate. Good to see you about mate!

    Q Man

    ReplyDelete
  3. WnRn2 July 2007 at 19:27

    Good to see you guys pop in.

    Boar had the outfit been running when you were over here I may have offered you a ride. ;-)

    Hey Q. Hope it is nice and warm up there???

    ReplyDelete
  4. Anonymous3 August 2007 at 11:24

    Hi Ross, my name is Rory McPherson I live in NSW just north of Mildura. Ive owed my 1998 Skorpion for just over a year now. Its a great bike. I agree with you about the chain noise though. I wish there was a way of stopping it. Have fun

    Rory rory.mcpherson@education.nsw.gov.au

    ReplyDelete

Post a Comment

Popular posts from this blog

Tuning 40mm BING CV carburetors for BMW motorcycles by ear.

Steve Doyle has put together this great and simple guide to tuning your Bing carbs. No need for expensive tuning equipment. So over to Steve...... Any feed back on this How To please email me and I will pass it onto Steve. There are 3 common methods to syncing the carbs. They will all work 1. Shorting the plugs. http://bmwmotorcycletech.info/synchcarbs.htm and http://www.airheads.org/content/view/216/98/ 2. Using a manometer of some sort. Carbtune, Twinmax or home made http://www.airheads.org/content/view/183/98/ 3. Using your ears. No comprehensive articles that I could find.. In the spirit of learning to service and tune at home and after lots of reading, I decided that for me the "by ear" technique might be the most useful, as it doesn't require any special tools and can be performed anywhere. There is no risk of electrical damage to the bike or the one doing the adjusting. It was very difficult to find a comprehensive description of the procedure, so using the combi
4 comments
Read more

On a Sure Footing....

I love my BMW. More than any other bike I have owned. This doesn’t mean that it is not without its blemishes. Take the hair trigger sidestand. Known to fold up when an Alpaca herder in the Andres sneezes and the bike is in Australia. Many a BMW owner has found their bike on its side on the ground. Fairing broken. The sidestand has folded up into the raised position. Why? Because it likes to. Once the smallest amount of weigh transfers off the side stand it will fly up. Also if you have an RT type fairing as mine does you can not put the stand down when sitting on the seat. Well I can’t with my short legs. I have to clamber off the bike while holding it up right and then use centre stand. I don’t trust the sidestand. This Video shows how vicious the original sidestand is. Click on the play button. That all changed yesterday. I fitted a SureFoot sidestand . Moto-Bins in the UK supply these. They are of a very sturdy construction. Comes with full fitting instructions and 2 new
1 comment
Read more

Ride impression of the Yamaha MT-03.....

Yamaha have realeased their new 660 based single. The MT-03. See I so want one....MT-03 The bike can be had in Europe but not here in Aussie land. I have asked Yamaha Australia if they will bring them in. They said "No plans at this stage to introduce the MT03 in to Australia." To rub salt into the wounds, axxess , the forum admin guy at http://forum.monoconnection.nl/ got to ride one. NOOOO!!! So unfair. He translated his ride impression into English for those of us who will not get to ride this. Thank you mate for doing this for us. So lets see what he has to say..... Saturday 16 February I could try the Yamaha MT-03 at Gebben Motors. I could try a brand new red 2008 model. After a short instruction and a warning because of the new tires we were ready to go! The first thing I noticed was the enormous wide steer and the upright riding position It gave me a feeling of absolute control and power! The seat was quit hard but not uncomfortable at all. Unless it was still freez
7 comments
Read more