Skip to main content

I can see clearly now…….

If you have a Skorpion that has the standard European twin headlamp and you ride at night how do you do it? It mystifies me how they could sell this bike with such a hopeless headlamp. I know the law in Europe says that you can only have one of the headlamps on at one time. That way any on coming traffic won’t think that it’s a car way off in the distance. Good for the other road users but really bad for me at night. It would have been better to use a lit match. Sorry if you find the standard headlamp ok.

So how to fix this? Easy get a Yamaha headlamp from any FZR/TRX etc Bruce Campbell told me. So that’s what I did. Bought a TRX850 headlamp off eBay. Paid $49.00 for it.

Once here it was a simple job to take the top part of the fairing off and then remove the original headlamp. I found that the connectors are not the same when you have twin headlamps. Parts from my old XV1000 came to the rescue. XV1000 Headlamp loom was spliced into the MuZ loom. Plug in the connectors and wow look at that lovely light bouncing off the garage wall.

New Head lamp fitted.




Bolt fairing back on. Also put original mirrors back on. Now that I have the handle bars set where I like them they have pulled my elbows out of the way of the original mirrors.

It’s night time by the time this has all happened. So that makes it perfect to go and test the light. Dark streets are now well lit. High beam is no longer a narrow beam of spotlight. “I can see I tell ya. I can see!”

Next modification has to be a Scot Oiler for the chain.

Comments

  1. Ah, so THAT'S why all those bikes with just one light on? I always thought it looked absolutely horrible, but I suppose there is some logic behind it...

    I learned one new thing today, and it's still before 7 am :)

    ReplyDelete

Post a Comment

Popular posts from this blog

Tuning 40mm BING CV carburetors for BMW motorcycles by ear.

Steve Doyle has put together this great and simple guide to tuning your Bing carbs. No need for expensive tuning equipment. So over to Steve...... Any feed back on this How To please email me and I will pass it onto Steve. There are 3 common methods to syncing the carbs. They will all work 1. Shorting the plugs. http://bmwmotorcycletech.info/synchcarbs.htm and http://www.airheads.org/content/view/216/98/ 2. Using a manometer of some sort. Carbtune, Twinmax or home made http://www.airheads.org/content/view/183/98/ 3. Using your ears. No comprehensive articles that I could find.. In the spirit of learning to service and tune at home and after lots of reading, I decided that for me the "by ear" technique might be the most useful, as it doesn't require any special tools and can be performed anywhere. There is no risk of electrical damage to the bike or the one doing the adjusting. It was very difficult to find a comprehensive description of the procedure, so using the combi

On a Sure Footing....

I love my BMW. More than any other bike I have owned. This doesn’t mean that it is not without its blemishes. Take the hair trigger sidestand. Known to fold up when an Alpaca herder in the Andres sneezes and the bike is in Australia. Many a BMW owner has found their bike on its side on the ground. Fairing broken. The sidestand has folded up into the raised position. Why? Because it likes to. Once the smallest amount of weigh transfers off the side stand it will fly up. Also if you have an RT type fairing as mine does you can not put the stand down when sitting on the seat. Well I can’t with my short legs. I have to clamber off the bike while holding it up right and then use centre stand. I don’t trust the sidestand. This Video shows how vicious the original sidestand is. Click on the play button. That all changed yesterday. I fitted a SureFoot sidestand . Moto-Bins in the UK supply these. They are of a very sturdy construction. Comes with full fitting instructions and 2 new

Ride impression of the Yamaha MT-03.....

Yamaha have realeased their new 660 based single. The MT-03. See I so want one....MT-03 The bike can be had in Europe but not here in Aussie land. I have asked Yamaha Australia if they will bring them in. They said "No plans at this stage to introduce the MT03 in to Australia." To rub salt into the wounds, axxess , the forum admin guy at http://forum.monoconnection.nl/ got to ride one. NOOOO!!! So unfair. He translated his ride impression into English for those of us who will not get to ride this. Thank you mate for doing this for us. So lets see what he has to say..... Saturday 16 February I could try the Yamaha MT-03 at Gebben Motors. I could try a brand new red 2008 model. After a short instruction and a warning because of the new tires we were ready to go! The first thing I noticed was the enormous wide steer and the upright riding position It gave me a feeling of absolute control and power! The seat was quit hard but not uncomfortable at all. Unless it was still freez