Skip to main content

R60 and chair...


As an ole sidecar rider myself I still have one big soft spot for the third wheel. Even more so when the chair is slung from an old BMW.

I found this outfit while surfacing the net. I have nothing to do with the shop in the UK that is selling. I get no money for putting it up here. Bowbury Engineering & Motor Works.

This is their blurp...

This outfit was built up as a "green lane special"; a bike to have a lot of fun on. It could also be painted up as a "military" machine, for those into re-enactment. For that, it would not be too authentic, but what the hell! When this machine came in, the engine was rattling like a bag of rusty old nails. This engine was not the original, so the numbers did not match. There were also, numerous electrical problems, including the usual, faulty coil. Another, fully reconditioned, to "as new" engine has now been fitted, and all electrical problems sorted. As a result, it now runs very sweetly. This is a fun machine, to be enjoyed. It's not one for the "rivet counters"!




Labels:

Comments

Post a Comment

Popular posts from this blog

Tuning 40mm BING CV carburetors for BMW motorcycles by ear.

Steve Doyle has put together this great and simple guide to tuning your Bing carbs. No need for expensive tuning equipment. So over to Steve...... Any feed back on this How To please email me and I will pass it onto Steve. There are 3 common methods to syncing the carbs. They will all work 1. Shorting the plugs. http://bmwmotorcycletech.info/synchcarbs.htm and http://www.airheads.org/content/view/216/98/ 2. Using a manometer of some sort. Carbtune, Twinmax or home made http://www.airheads.org/content/view/183/98/ 3. Using your ears. No comprehensive articles that I could find.. In the spirit of learning to service and tune at home and after lots of reading, I decided that for me the "by ear" technique might be the most useful, as it doesn't require any special tools and can be performed anywhere. There is no risk of electrical damage to the bike or the one doing the adjusting. It was very difficult to find a comprehensive description of the procedure, so using the combi...
4 comments
Read more

ZS - The constant fiddle.

Why can it not be left alone? Why this constant fiddle? I can't answer this cause I can't stop doing things to the ZS. Added a pillion pad. Added a cowling to the speedo. Stripped all the stickers off the tank. Rubbed the rust back. Sealed the tank with Rust-oleum Clear. Made a tank bra out of leather and on old belt. To help stop fuel from affecting the clear coat when filling up. Used an old bum bag to fill the void between the tank and the saddle. Put headlight back to the original position. Bigger mirrors.
Post a Comment
Read more

On a Sure Footing....

I love my BMW. More than any other bike I have owned. This doesn’t mean that it is not without its blemishes. Take the hair trigger sidestand. Known to fold up when an Alpaca herder in the Andres sneezes and the bike is in Australia. Many a BMW owner has found their bike on its side on the ground. Fairing broken. The sidestand has folded up into the raised position. Why? Because it likes to. Once the smallest amount of weigh transfers off the side stand it will fly up. Also if you have an RT type fairing as mine does you can not put the stand down when sitting on the seat. Well I can’t with my short legs. I have to clamber off the bike while holding it up right and then use centre stand. I don’t trust the sidestand. This Video shows how vicious the original sidestand is. Click on the play button. That all changed yesterday. I fitted a SureFoot sidestand . Moto-Bins in the UK supply these. They are of a very sturdy construction. Comes with full fitting instructions and 2 new...
1 comment
Read more